05-21-2009, 01:37 PM
Hallo boriel, you wrote, the control codes can be used like in BasIn, I tested it:
works fine, but BasIn allows this too:
which does not work. Is this a bug?
Btw: Release 1.2.1 is excellent. My latest test Program needed 8 Kb before, now it is only 4 Kb...
Code:
print at 0,0;"\{i7}\{p2}\{b1}Test"
Code:
print at 0,0;"\{i7p2b1}Test"
Quote:The escape sequences for control characters are as follows:
\{in}
Ink colour n, where n is in the range 0 to 7.
\{pn}
Paper colour n, where n is in the range 0 to 7.
\{bn}
Bright n, where n is 0 or 1.
\{fn}
Flash n, where n is 0 or 1.
Note: Control character escape sequences can be combined, so that for instance \{i6p1f1} is equivalent to \{i6}\{p1}\{f1} - flashing yellow ink on blue paper.
Btw: Release 1.2.1 is excellent. My latest test Program needed 8 Kb before, now it is only 4 Kb...
------------------------------------------------------------
http://lcd-one.da.ru redirector is dead
Visit my http://members.inode.at/838331/index.html home page!
http://lcd-one.da.ru redirector is dead
Visit my http://members.inode.at/838331/index.html home page!